Bright Ideas 2018 Award Winner – English Australia (QLD)

Great news!

In March, I presented two workshops at the English Australia (QLD) PD Fest. This event is the state precursor to the national conference held later this year.

The Bicycles Create Change Internship workshop was one of 5 sessions nominated for the EA (QLD) Bright Ideas Award.

This blog formed the basis for work undertaken for this internship, and bicycles and community participation were main features for this project.

All nominees had a mystery EA selection committee representative attend their session and participant feedback is also considered.

The winner is sponsored by EA (QLD) to present at the national English Australia conference in September in Sydney with all expenses paid: full EA Conference and gala dinner registration, accommodation for 2 nights in Sydney and return flights.

I just got the news our session won the Award!

Here’s what I got:

We are delighted to announce the recipient of this year’s award:

Nina Ginsberg

from Griffith English Language Institute (GELI), Griffith University

The committee was unanimous in its decision. Nina’s paper and presentation, entitled From EAS to Collaborative Internship: Lessons and insights where bicycles create change, was highly praised by both the committee and in delegate feedback.

Hooray! What an honour! I immediately contacted my four ’emerging professionals’ (collaborators) to let them know – they were tickled pink!

(Note: I had asked that the students be listed on the program and in the title as co-presenters. But, it is a ‘teachers conference’, three of the students were not physically there on the day (they are overseas, so they presented via video) and seeing as though I was ‘the main presenter ‘- the organizers used my name only on the program. However, the students are listed in the event publication. Such a bummer we can’t all go to present as a team in Sydney. So I am going to Sydney as the team representative, but this was by no means a solo project and the award and recognition goes to everyone on our amazing team. NG)

Bicycles really do create change!

I am very proud of our team.

We have all come so far since our humble beginnings in Jan 2016. Now 1.5 years on, Gabriel is completing his Social Work course at Griffith Uni, Sachie is back home in Japan completing her final semester, Mauricio has graduated and is now working in Brisbane in IT, and Juliet is a Special Ed teacher in NZ.

The students worked so hard during this internship (and still continue to do so!). As the program designer and facilitator, I learnt just as much as they did!

Now our project is going to the national conference! Hooray!

Here’s the PD Fest Learnings Publication 2018 with all session details:

Thanks all!

Thank you to all the teachers who attended the session and saw the value in what we were doing. It was great to see such enthusiastic interest in our project.

A big thanks to English Australia (QLD), the selection committee and Pearson for this wonderful opportunity.

Workshop Session Abstract – From EAS to Collaborative Internship: Lessons and insights where Bicycles Create Change

Many international students undertake English and Academic Skills (EAS) and DEP bridging classes to get into university with the ultimate aim of getting a job in their field of study. There is a perception that English classrooms are for learning English, University tutorials are for discipline-specific content, and the workplace is for vocational skills. Internships one way where students can become more work-ready. However, a number of studies confirm that current tertiary students are lacking in generic employability skills (ACNielsen Research Services 2000; ACCI/BCA 2002), an issue that is even more challenging for international students. I was curious to explore what a career development program that specifically catered for the academic, vocational and personal needs of the international students in my DEP classes might look like. This presentation was a brief overview of the origins, activities and outcomes of this exploration: The Bicycles Create Change.com 2016 Summer Internship Program.

Program background

This Internship was a volunteer, eight-week, collaborative internship that ran from January 4th to February 27th, 2016. It required participants to fulfil 80-110 working hours. The blog Bicycles Create Change.com (which has over 118,700 hits locally and internationally) served as the professional platform for work activities as it is a low-cost, high-exposure, authentic, skills-integrated outlet to showcase work.

The program was semi-structured with space to modify and self-initiative content. Hours were achieved individually, in pairs and as a team. The team met for one full day each week to review tasks, run workshops, refine skills and discuss progress.

This program integrated key theories including, scaffolding new skills (Vygotsky 1987), the need for authentic vocational guidance, participation and engagement (Billet, 2002), promoting creative thinking and expression (Judkins, 2015) and building on foundational DEP EAS skills and competencies (GELI, n.d.).

Origins and participants

The four volunteer participants varied in ages, backgrounds and degree levels and disciplines. The 4 volunteers for this program were; Sachie (female, 23, Japanese, Philosophy undergrad), Mauricio (male, 33, Columbian, IT PG), Juliet (female, 37, Indian, Special Education PG) and Gabriel (male, 42, Cameroonian, Social Work PG). All participants had just graduated from the Griffith English Language Institute (GELI) 10-week DEP program in December. Semester 1 2016 did not commence until Feb 28^th, leaving a gap of 9 weeks before university started, which is when the internship was undertaken.

Key considerations

There were are a number of key considerations built into this program:

Strengthening self-confidence and independent learning
Experience with unique, transferable and challenging skills
Fostering creativity and valuing artistic expression
Emphasis on developing reflection, collaboration and planning skills
Integrating EAS, vocation and personal skills to a range of contexts
Promoting initiative and the ability to generate own opportunities
Increasing employability, CV and work-ready skills
Authentic interactions and connection with locals/community
Create a comprehensive evidence portfolio of work, skills and achievements
To have fun applying skills in a challenging and productive way

Program design

The focus was to build on current competencies, develop new skills, build a professional portfolio of experience (and evidence), and for participants to become more confident in initiating their own opportunities and outputs.

This program minimised the ‘daily’ supervision and ‘student’ mentality of traditional internships to instead put supported autonomy firmly into the hands of each participant, who ultimately self-managed their own workload. The program provided tailored experiences (below) that provided exposure to a collection of advanced competencies that are cumulatively not commonly experienced in other internships or classes.

The program integrated three main competency streams: EAS, Professional Skills and Individual Development. The program was scaffolded so that tasks became progressively more challenging and required greater participant self-direction to complete, as seen below:

Unique features

Participants undertook a series of challenging tasks, including:

Develop and present a professional development workshop (individually and in pairs)
Undertake an individual project that resulted in an output (ie. Crowdfunding project, publication)
Self-identify an industry leader to cold call for a 20-min introductory meeting
Complete a Coursea MOOC on an area of their choosing
Research a social issue to creatively present an individual ‘art bike’ as part of a team Public Art Bike Social Issue Presentation and Forum
Research and produce five original blog posts on how bicycles are being used to create more positive community change in their home country
Weekly meeting with an assigned independent industry expert mentor
Join an industry association and attend events
Series of community activities: vox pops; invite locals to contribute to a community storybook; solicit locals to donate bicycles; deliver their work at a local community garden to the general public as part of the Art Bike Public Forum; conduct an individual public presentation
Complete an Internship Portfolio (documentation of work and reflection journal that documents, audits and reviews tasks, opportunities and skills)
The BCC Internship Team: Public Art Bike Social Issue Presentation and Forum. Sunday 13^th March, 2016.

Takeaways

There were many lessons learnt from this project and given time constraints, only a few were touched on in the presentation. Some key takeaways were:

Provide transferable and unique opportunities to develop ‘generic employability’, critical reflection and creative problem-solving skills
Provide integrated, genuine and practical ways to apply skills
Celebrate strategies, ‘sticky points’, ‘misfires’ ‘pregnant opportunities’ and successes
Make tasks more challenging and higher profile
Participants loved having more contact with the local community
Adaptations are needed for aspects to be taken up by educational institutions
Work from the end result backwards (CV and skill development)
Have visible, productive and meaningful evidence (or body) of work
Foster ability to independently create own opportunities and networks
Honour unexpected outcomes
Change the mindset to change to experience

For more details, or to contact the participants, go to Bicycles Create Change.com (search: internship). This project was a voluntary, independent and informal project, so for ideas on how to modify or embed aspects of this program into an existing course or for any other information, please contact Nina Ginsberg.

References

ACCI/BCA (2002) Employability skills for the future, DEST, Canberra.

ACNielsen Research Services (2000) Employer satisfaction with graduate skills: research report, Evaluations and Investigations Programme Higher Education Division, Department of Education Training and Youth Affairs (DETYA).

Billett, S. (2002). Workplace pedagogic practices: Participation and learning. Australian Vocational Education Review, 9(1), 28-38.

Griffith English Language Institute (GELI): Direct Entry Program. (n.d.) Retrieved from: https://www.griffith.edu.au/international/griffith-english-language-institute.

Judkins, R. (2015). The art of creative thinking. Hachette UK.

Lyons, M. (2006). National Prosperity, Local Choice and Civic Engagement: A New Partnership between Central and Local Government for the 21st Century. London: Her Majesty’s Stationery Office.

McLennan, B., & Keating, S. (2008, June). Work-integrated learning (WIL) in Australian universities: The challenges of mainstreaming WIL. In ALTC NAGCAS National Symposium (pp. 2-14).

Vygotsky, L. (1987). Zone of proximal development. Mind in society: The development of higher psychological processes, 5291, 157.

23/04/201826/04/2018

Bike rides on Astronomy Day 2018

At the start of this year, I posted on the interesting range of 2018 ‘International Day of the ..’ events. So, I was excited when I found out that the latest International Astronomy Day was on the weekend. Especially when I saw how a few cycling groups took advantage of this unique celestial event to organise some community night rides. What a wicked thing to do! Check details to suit as per where you live (i.e. Northern or Southern Hemipshere).

Image: The Astronomical League

I am a BIG fan of night rides.

On this blog, night riding is celebrated in many ways, such as:

And this weekend provided another exciting night time ride opportunity!

International Astronomy Day 2018!

Chart by Guy Ottewell

What is Astronomy Day?

Astronomy Day is a global event observed every spring and ‘fall’ (autumn).

This an annual event is intended to provide a means of interaction between the general public and various astronomy enthusiasts, groups and professionals.

The event was started in 1973 by Doug Berger (then Astronomical Association of Northern California president). His intent was to set up various telescopes in busy urban locations so that anyone could enjoy looking at the heavens.

Since then the event has since grown and is now celebrated in many ways around the world by people in science and the general public.

Originally, Astronomy Day occurred on a Saturday between mid-April and mid-May, and was scheduled so as to occur at or close to the first quarter Moon. For this year, that meant that this latest official International Astronomy Day fell on April 21, 2018.

In 2007, an autumn equivalent of Astronomy Day was added. The next Autumn Astronomy Day will be on October 13, 2018. So, put it in the calendar and organise a night ride!

What does this mean for cyclists? See what these guys did!

It means you get out on your bike with a few others and go for a killer night ride to learn and enjoy our incredible cosmos!

My favorite Astronomy Day bike event for this year was held by Bicycle Tree. They are a nonprofit community bike centre/shop in Santa Ana (Orange Country, CA).

See more of their work and good times on Instagram: @Bicycle Tree.

To celebrate Astronomy Day , the Bicycle Tree held a: Sabor de Santa Ana Community Bike Ride.

Image: The Bicycle Tree

The Bicycles Tree: Sabor de Santa Ana Community Bike Ride.

The Bicycle Tree instruction for this event were: This Saturday is Astronomy Day, so we’re going to gaze upon the universe during our ride Saturday night! Telescopes and guidance will be provided by Jeff Schroeder, a former JPL engineer and Mount San Antonio College planetarium lecturer, and current Outreach Director for the Pomona Valley Amateur Astronomers! Jeff will be bringing meteor samples as well.

We will, of course, also be getting food along the way. We’re going to TCW – Tacos Churros and Wings for stellar food!

The ride meets at the shop at 6:00 pm and we roll out at 6:30. We’ll be back at around 9:30. We do this monthly ride to get together and enjoy some of the great food that Santa Ana has to offer while cruising through this city’s streets and neighborhoods! .

We’ll be riding about 12 miles at a mild pace. We’ll end up back at the shop at around 9:30.

Bike rides on Astronomy Day 2018 @Bicycles Create Change.com 23rd April 2018 Image: The Anime Gallery

Talk about making the most out of a biking community event!!

This event is brilliant because it really does create more positive community change, in that it provides an opportunity for partipants to:

be part of a key international event/date
brings a range of community members together
riders get to learning about the universe – something new
gain some experience using specialist astronomy equipment
have fun riding bikes around your local area
get out and be active in the evening

What a great idea this kind of community ride is!

I’d love to see more of these kind of events happening.

These events provide great examples and inspiration to plan for other upcoming ‘international’ dates.

I can’t wait to see what kind of innovative bike ride you put on!

Best of luck and happy star gazing on your next ride all!

Here’s what is coming up for those in the Northern Hemisphere – have fun! Image: The Astronomical League

For more Astronomy Day info: click here for a Fact Sheet, history and more about ‘when’ and ‘where‘ about this event from The Astronomical League (what a great name!).

18/04/201819/04/2018

Ruby the trail dog

My trail dog Zoe (above) and I have had many adventures together, both on and off the bike (see Instagram). I continue to learn valuable life lessons from her and could not image my life without her. As a trail dog, she is energetic, attentive and runs with wild abandon and joy. One other such trail dog is Ruby – and if you have not meet Ruby before, you are in for a treat! Enjoy! NG.

Dogs and trail riding just go together – it’s a universal pairing.

For a long time, I have been a strong advocate to have more MTB locations that allow dogs and to have more rider-dog events and competitions.

This blog continues to promote more dog-inclusive cycling, like:

Xiaosa, the tiny intrepid Chinese dog that spontaneously joined a group of cycle tourists on their epic 20-day, 1,833km long trip and kept up with the 60kph pace for the whole time she was with them, outlasting some of the cyclists!
Riding for Rescues, which is an inspirational US program where bike riders raise money to help, rescue and sponsor animals (many of them dogs) to get them out of a high-kill shelter and be re-homed instead of being put down. Amzing work!
My #bikes_CISTA Instagram project, which I started last year, is a way to recognised and celebrate people out and about on their bikes with their dogs. #Bikes_CISTA stands for Cycling Interspecies Team of Awesomeness. There is a lot more to this project, but essentially, my criteria for including a photo in this collection is to have at least one rider, one dog and one bike – and that the subjects are strangers.

Coincidentally, the #Bikes_CISTA project was initially partly inspired by a photo I saw of Ruby ages ago (below), which was so exhilarating, that I used it as my first contribution to kick off the project…and that was how I found Ruby!

Ruby the trail dog

Ruby is a 5-year old Vizler. Ruby’s owner, Tom is a wicked photographer, keen MTBer and has created an impressive business brand and following based on Ruby.

Ruby has her own website which is filled with her adventures, extra material and more info about her. She is also on Twitter and Facebook.

My recommendation (and favourite) is Ruby’s beautiful and inspiring Instagram account @rubythetraildog. This is where I first encountered Ruby – and I am still an avid follower.

This account is exceptionally well curated and has endless stunning shots of Ruby out on trails, with mates, chillaxing, spending time with family and friends, celebrating holidays and just goofing around.

I have loved watching the development of Ruby over time. Her Instagram photos are not only a beautiful collection of images in and of themselves, but they also tell a warm and personal story of the various ages, stages and places that have contributed to making Ruby who she is – and her sunny personality just shines through.

Kudos to Tom, who has not only successfully and strategically developed Ruby into a successful personal brand that supports his craft and hobbies, but has done so in a way that is balanced and inspiring, and allows him to do what he loves most – wicked!

Why I love Ruby the trail dog

Well, er…. just look at the photos!

Who can argue with the happy, positive, healthy, outdoor, active and social sentiments that each picture so beautifully represent? Don’t we all long for such quality time? On our bikes, in nature, with our four-legged besties and a few mates riding somewhere spectacular with nothing else to do but to fully enjoy life.. hells yeah!

As a trail dog owner, I love seeing dogs out with riders. After moving to Brisbane, this became more difficult due to the militant dogs-on-leads rule. But we still manage to ‘be creative’ and get time riding tails with Zoe, although not as much as I did in Melbourne, or would like.

Ruby is my favourite go-to if I am ever feeling overwhelmed, disheartened with the news or the way the world is heading. Ruby reaffirms for me all the good things the world has to offer.

For me, Ruby is a salient reminder (as are all dogs) to live in the moment, enthusiastically enjoy riding bikes, have more fun, frolic in nature, rest when you need to, and love unconditionally.

So, grab a four-legged friend (or someone else’s!), ya bike and get out there!

Life on a bike is better with a trail dog.

Living the dream!

(*sigh*)

All Images: Tom @rubythetraildog

18/03/201818/04/2018

Bicycle Short Film People’s Choice Winner

Hooray!

Great news!

Our short film ‘Leki’ took out the People’s Choice Award at the 2018 Brisbane Bike Short Film Festival on Friday night!

For this film, I collaborated with Isabel Turner, who is the spunky, young designer who really made this film happen.

Thanks to all!

Bella and I wanted to say a big thank you to all those who people who voted for us! We very much appreciate your great sense of humour and for supporting more inclusive, active and colourful (cycling) communities. We need more happy people out there like you! Thank you!!

Congratulations also to all the other entrants who made a great effort and contributed their stories and creativity! It was wonderful to see such multiplicity in their approaches, themes and celebration of bikes in Brisbane.

A big thank you also to the organisers, volunteers and sponsors who worked so hard to make this a memorable and fun night.

Without further ado – here is this our 2018 Brisbane Bike Bites People’s Choice film. Enjoy!!

Click here to find out more about the lead-up to the Festival here.

Click here to see the finalists films.

‘LEKI’ Brisbane Bicycle Short Film People’s Choice Winner!

The night started out with a Style over Speed ride for those who could make it (I had to teach). Then there was a boisterous welcome by the bike band on arrival at the Kangaroo Point Multicultural Centre.

It was great to see lots of bikes parked outside for the event. Inside, people milled about eating pizza, drinking and chatting. Then the bell sounded for us to take our seats.

First up was a screening of the six short film finalists. I loved the diversity of each entry – they were all completely different.

I really appreciated the effort and thought that had gone into each entry. I especially liked the moving simplicity of The Route and the down-to-earthiness and kool kustom bikes (and lit-up allure) of Anthony’s Ride your bike. Free your soul.

Before interval, the Spaces for Cycling Brisbane judges announced their top prizes for first, second and third.

A special award went to Tegan Methorst for being the youngest film-maker to enter with her film It moves you.

Then it was time for intermission. More drinks, socialising and pizza. This is where the audience got to cast their votes.

The second part of the night was a filming of the film Why we ride. This is a documentary from Copenhagen exploring the ideas and experiences of a range of cyclists in the Netherlands. It was super interesting and had lots of ideas that have stimulated and progressed very interesting conversations since! (See the trailer for this feature film trailer below.)

The People’s Choice Prize was awarded at the end to close.

What a night!

The making of Leki

At the end of January 2018, Bella moved to the UK for work.

So as a final farewell collaborative project, we decided to put together a bicycle short film entry about my flower bike Leki. Bella did all the hard work behind the screen (scene?) that made this film happen.

We had a great time doing the filming in and around our community.

The interactions and conversations we used were all total strangers that I accosted on the street then and there to interview. We wanted an authentic and true, unedited representation of what local people thought and said about Leki.

It was a little daunting going up to random strangers and asking them to go on film to talk about Leki, but our community was super supportive and up for it.

We filmed around Bayside Wynnym Manly area in Brisbane.

We had many ideas about what we were going to put into it. We discussed doing some of the stories about Leki in animation and adding in some more creative aspects to show off Bella’s skills.

However, in the end, we wanted it to be no-fuss, low-key and accessible, so opted for a straightforward vox pop and storytelling format.

We wanted Leki and the community to speak for itself without ‘jazzing it up’ with any frills – just take it as it is – and enjoy!

We wanted to include a few local sites around our community to up the ‘Brisbane-ness’ of the film (I talk about riding in Melbourne at one stage), so we wanted to be sure people knew we were specifically located and riding around in and around Brisbane.

Local Cycling Community Hero – Richard @ Crossley Cycles

We included an interview with Richard Crossley from Crossley Cycles (Manly, Brisbane) as well. This was important to us for a number of reasons; Richard is not only a wonderful friend and constant supporter of me personally (he loves to chat about my PhD bike research and see what I’m making next out of recycled bike parts and inner tubes, so I am often in his workshop on Saturdays tinkering and chatting with him as he works on his bikes), but he is also a local hero to the Manly cycling community.

Richard has been serving local riders and BMXers at his shop in Manly for 47 years – and he is well loved and well respected by some very big names.

So having Richard in our short film was our way of recognising and honouring his contribution to the range, colour and life of the local Brisbane cycling network. Thanks Richard!

Thanks Bella!!

A massive big thanks to Bella Turner for all her hard work on Leki – and for all the other work we did together. Congratulations…. and best of luck in the UK!!

04/03/201807/03/2018

Happy 2018 Sydney Mardi Gras on bicycles!

In homage to the incredible 2018 gay and lesbian Mardi Gras festivities held this week in Australia, this post is about the ways in which bicycles have featured in the Sydney Mardi Gras over the years. Happy strutting and mirror balls all! NG.

Happy 2018 Sydney Mardi Gras on bicycles!

This week was the 40th anniversary of the Sydney gay and lesbian Mardi Gras. I lived in Sydney for 3.5 years and had a wonderful time there. The annual Mardi Gras festival is always a major social and cultural event in my calendar. The colour, sparkles, energy, cheekiness and sheer volume of ..well.. everything ..is truly something to behold.

And this year is extra special because of the historic Yes vote for gay marriages – so there was a gay marriage included in the parade for the first time ever.

Oh… and Cher (at 71) was there killing it as the headline act for the official party – and for the 500,000-strong crowd. Amazing!

If you missed it (or want to see it again!) SBS has the full ‘glitter-filled’ Sydney Gay and Lesbian Mardi Gras broadcast available online here.

Aside from the well-known The Dykes on Bikes (who are on motorcycles, not pushies of course!), on the surface, there does not seem to be much bicycle action at Mardi Gras.

But… dig a little deeper and you will find that Mardi Gras has a heart of two-wheels! Here are just a few examples…..

Sydney Spokes

The Sydney Spokes is a social cycling group for gay and lesbian riders. This cycling club has an amazing history and connection with the Mardi Gras.

In 1987, Sydney Spokes had it’s first official and public recognition when it was listed in the Mardi Gras Festival Guide. The listing described their first bicycle-theme Mardi Gras entry for that year.

In 1991, the club won 1st Prize Mardi Gras Parade for Best Community Float, which entailed Brett Heil (organiser) and three cyclists ‘towing’ a ute with floating ropes of helium balloons. Upmarket bikes were raised high on the back of the ute and Sydney Spokes riders flanked both sides, whilst other members circled the main float on bikes.

According to the club, the Channel 9 Sunday Evening News (then the highest-rating program on Sydney television) led its Mardi Gras coverage with footage of the Spokes float.

In 1995, the club once again took out a Mardi Gras Parade Prize, this time for Most Outstanding Foreplay, which was awarded for their performance which honoured loved ones who had died of AIDS through the clubs ‘Spirits of the Night’ entry.

There are a few rainbow cycling clubs around like Sydney Sokes – for example, the Velociped Salon Team below….

A gift idea for those rides who have a sock/kit fetish …. (joke intended!)

All across Australia, people celebrate Mardi Gras and rock the rainbow on two-wheels in many different ways.. like this lovely free spirit below photographed in Perth.

And these two brave Sydney Spokers below were snapped in the 2013 Mardi Gras….

And, finally, perhaps this guy below SHOULD have been at Mardi Gras??

However you ended up celebrating Mardi Gras this year – I hope you had a wonderfully sparkly time!

Remember, you don’t have to wait for Mardi Gras to rock the rainbow, get happy and get out on ya bike! Happy Mardi Gras all!

22/02/201824/02/2018

Bike Rave Melburn – Pink Flamingo 2018

While I was down in Melburn (Melbourne) for a week performing the Bio Bike at the Sustainable Living Festival (SLF), Bike Rave Melbourne Pink Flamingo 2018 was held. I couldn’t believe my luck! Sarah came with me (her on a flower bike, me on the Bio Bike) and we had far too much fun. To the Melburn bike riding community: you are amazing, I miss you and thank you!

What is a Bike Rave?

For many people, bike raves are the most fun you can have on two wheels! Bike Raves usually follow a route through city streets while pumping out tunes from ‘sound’ bikes. There is usually a theme for each Bike Rave. Any and all riders are welcome (that’s the point!). They stop at predestined locations for a while to socialise, recharge, catch up and have a boogie – GOLD! Bike Raves are highly anticipated, well attended and wicked fun.

Bike Rave Melburn – Pink Flamingo

On Saturday, Feb 10th I rode in the Melburn Pink Flamingo Bike Rave. It was awesome. I would say there were at least 200-250 riders and I was blown away by the variety in the ages and styles of the riders (and bikes) that attended. There were young and old, families/individuals/groups of mates, tall bikes, cargos, art bikes, commuters, fixis, burlesque performers, couriers, bike polo teams.. the list could go on and on – there was everything (and everyone) imaginable!

It was wicked cruising Melbourne city in a massive gang of cool katz with cool music.

Riding along Southbank just after 7 pm meant that the Bike Rave were passing all the cafes, restaurants and bars at dinner time – on a Saturday night. They were packed. It was hilarious to see the reaction of diners and this massive line of pink, fluoro-wearing bike ravers passed them by!

Pedestrians and tourists stopped to gawk as well. People in cars were honking. At the lights halfway through, I got chatting to a father and son who were out riding along the Yarra River and convinced them to join us for an hour, which they did -and they had a ripper time and said they would be back.

I rode and chatted with heaps of people along the way. I love riding near the massive speaker bikes. Because I was riding the Bio Bike, people were offering me drinks all night (bless!) of which I only accepted once we had stopped. Navigating bollards (wings up!) and some of the tighter walking bridges was a little tricky, but other riders were happy to wait, helped out if they could and looked out for me on the road and footpaths. Bloody awesome!

It was super safe and super fun. And I danced my arse off!

I got extra kudos when bike ravers heard that I had come all the way from Brisbane for the event (well.. and the SLF). The Bio Bike was a smash hit – and I got extra points for flat-packing it down into a bike bag and travelling with it from Brisbane. Talk about bringing it to the party!!

I caught up with some familiar faces and also met some wicked new people. Everyone was super welcoming, happy and up for a chat. As the night wore on, lights were turned on. I saw packed dinners and food being shared along with drinks, compliments and laughs.

Around 8.30pm, some of the families started to filter back home, leaving the ragers to push on. The later it got, the more people were looking after each other, until we reached our final destination at Flagstaff Gardens where everyone parked it and hung out until they decided it was time to go home.

(*Sigh*)

Bike rave with an added purpose

Bike Raves are usually free events – but for this particular rave, organisers invited punters to bring along a cash donation for charity Bicycles for Humanity, which they collected throughout the evening. Given my PhD research and predilections of supporting community and international development projects – I was super impressed. Go Melburn!

Here is the official Melburn Bike Rave FB link.

How does the Sound/Music work?

Bike Raves are DIY events. You grab your MP3 player/phone and download the mix (for Pink Flamingo it was a curated a 4-hour mix). The mix is usually full of pumping party tunes to keep the crew bopping and dancing all night long and specifically made for the bike rave. KUDOS!

Just before you leave the meeting place there is a countdown so everyone can sync their music to begin at the same time. This means that where ever you are in the rave you are all listening to the pretty much the same thing (plus or minus 10-15 sec). It also means that if you arrive late, join in or miss the countdown, you can ask another rider what timestamp the track is up to and sync it that way.

For the Pink Flamingo Bike Rave, people had a range of sound setups. Some of the organisers, couriers and Christiana bike owners had especially large speakers setups. They were wicked! There were a few of these rigs dotted around and they really pumped out the tunes. They were awesome fun to ride with if you didn’t have your own music on board.

Other people had basket, booms or computer speakers zip tied to their bikes (or themselves!). There were some pretty impressive creations and some speakers were integrating into costumes, helmets and bikes.

Having a consistent power source and charging batteries was a key consideration for most speaker setups (as was size/weight).

The music for the ride was great! I’m still listening to the track now!

Here’s the Soundcloud link to download the 4hr Bike Rave track.

Image: @neaderstaal

Image above: Soundcloud

Where we went

Meet-up: Bike Rave Melbourne – Pink Flamingo 2018
Start: Saturday, February 10, 2018, 6:00 pm
Finish: Sunday, February 11, 2018, 12:00 am
Meet at: Riverside Skate Park, Alexander Gardens (parkland opposite side of the river from Birrarung Marr), Melbourne, Australia.

After meeting at Riverside Skate Park, we headed off at 7:00 pm.

Here’s the route we took.

Here’s the same route, but in Google Maps.

Other interesting titbits

There are a few videos on Youtube of the event – here’s an example:

Here is some of the info the organisers released before the event. I really dug their straight shooting and fun style of communication and promotion!

THE WEATHER
If it’s nice out, we ride. If it’s cloudy, we ride. If it’s raining a little, we might ride. If it’s pouring, we don’t ride. Our speakers will get messed up. If you aren’t sure, show up anyways. Someone will be there from 5:30 pm to let people know if the ride is cancelled.

DRESS UP
Pink Flamingo. Now that your bike is a shining beacon, time to fix yourself up. Dress in anything that’s pink. Flamingo, Pink, Flamingo, Pink, Pink, Flamingo. Pink. Flamingo. Sqwuak. One Legged Stand. Beaks Out. Pink Flamingo.

RAVE RULES
There are a few rules that we would like you to follow to ride the rave. This makes it safer for everyone and avoids problems on the night. We’ve never had an issue in the 6 years of running this event, so let’s work together to keep it that way.

1. Wear a helmet.
2. Get working bike lights.
3. Watch out for each other. If someone falls over, pick them up and see if they are ok.
4. Don’t be a dick to the public or Police. The public will most likely be confused. The Police have been quite understanding over the last few years, so don’t be rude. This could ruin the event and any future events.
5. Be safe and sensible when we are crossing at red lights.
6. Clean up after yourself – bring a plastic bag for your rubbish, we are not your parents – we ain’t picking up your shit.
7. Have fun

Check out more photos on Instagram using: #bikeravemelbourne #bikerave #bikerave2018

A massive thank you to the organisers, the riders and Melburn general public. A great time was had. Safe, super fun and a wonderful way to bring riders together and show city Melburn how fun riding bikes can be.

More Bike Raves, please!

This image from Soundcloud. All other images my own, a few pics are drawn from Freedom Cycling & Andrew Rance‘s Youtube videos of the event – thanks guys.

13/02/201803/09/2018

Bio Bike SLF 2018

It’s been an exciting last couple of days! After constructing the Bio Bike in Footscray with Pete and Tom helping me (thanks for being my random lunchtime saviours!), I put the frame on the bike Sarah had procured and all that was left was to put on the finishing touches. Then lunchtime Friday, I set off to ride the Bio Bike the 15 kms from Footscray into the city. I arrived at the Festival site on time, made some adjustments, got changed and then did the Friday night performance solo. Claire and Sarah joined me for Saturday and Sunday. Here’s what happened…

Bio Bike SLF 2018

We had a great time performing with the Bio Bike this weekend at Melbourne’s Sustainable Living Festival (SLF) 2018.

Check out our adventures and the awesome people the Bio Bike met on Instagram

Also see what else was on offer at the SLF 2018 on Instagram via:

So what did the Bio Bike do?

We were mainly located around the food precinct and near the Dome, which was great as there were always people milling about, we had more room to move about and we had much more shade than if we travelled up the guts of the display tents.

We met so many lovely people.

Essentially we asked people three things: 1. why they had come to the festival, or what they had seen at the festival they had liked; 2. what they thought was Australia’s most pressing environmental issue and finally; 3. what were they personally doing to help the environment and be more sustainable.

After chatting about this for a little while, we then said we wanted to award them an Eco Excellence Award for their hard work. We told them the background that each award was upcycled out of bicycles bits, inner tubes and found objects and was totally unique – just like they are! We would give them their award, then get photos with them wearing it.

The response was great.

I loved how different each interactions was.

We made a point of talking to people of different ages (young and old), cultures (from everywhere!), perspectives (some conservative, others super feral), lifestyle choices (urban, rural and some backpackers) – but each interaction was interesting and unique. It was an absolute pleasure.

I got to chat with Bob Brown on Friday just before he went on for the Big Debate. Then on Saturday, Claire, Sarah and I had a great time with Costa from Gardening Australia. (See picture below). Costa remembered Claire and I from our 2014 SLF Leki and the Ova show, and he spent ages with us chatting away, taking videos of us, introducing us to people and taking lots of photos. He is always a delight to catch up with!

Aside from meeting all the wonderful people we met, we got to hear about some amazing projects and ideas.

It was inspiring, humbling and reaffirming.

Claire, Sarah and I worked well together and had a lot of fun.

We wanted our show to be positive because talking about environmental issues can get the best of us down pretty quickly. We also wanted to inject some colour, humour and movement as most of the rest of the festival was stationary (ie stalls and stages), so it was great to have the freedom to roam around and be free to go along the river, up pathways and behind stalls. We found great people everywhere we went!

What needs modifying?

1. After the initial ride in and riding it for Friday’s gig, it became quickly apparent that we needed to make the pod higher. So on Saturday, we raised it and reinforced it where needed. This made being in the Bio Bike much more comfortable.

2. Before I left for the ride into the city, I ended up having to put in a modified splint/brace going from the back wheel to the sides of the tank to give the structure some rigidity and help hold the shape so it didn’t swing.

3. The seat had to be set at a certain height so that the rear of the shell didn’t rub on the back wheel. However, this meant that is was precarious for Sarah and Claire to ride the bike and difficult for them to put their feet on the ground to stop/start riding (we had one serious mishap from this). So an alteration is needed so that we are able to lower the seat as needed.

What we learnt

1. Make sure any lighting, cable ties or decorations do not infringe on the handlebars turning or gear leavers. On Saturday night, we strung up lighting all over the pod. It looked amazing! I had to do a quick gaffer job as loose cables started catching when I turned the handlebars and it made navigating tricky and potentially unsafe – but it was easily rectified.

2. We had an interesting discussion with one festival-goer who asked us if we recycled the cable ties. We explained that the pod screen was recycled from a previous project and that we did reuse the longer cable-ties. She suggested that we could use wire to link the bottle top pod together instead of cable-ties, which I thought was a great idea. I’m looking forward experimenting with this suggestion.

3. I am so glad we carried extra gaffer tape, cable ties and scissors – lifesavers!

4. People really appreciated the Eco Excellence Awards. It made me so happy to see how stoked they were to find out that each one is custom-made out of recycled bike parts. I was also super happy to hear people talking about the Awards and the Bio Bike while I was not performing. I overheard people waiting for food and in the beer tent chatting about cool stuff they have seen at the festival, showing their mate the Award they had received from us and saying that they had fun interacting with our performance. Best compliment ever!

Would we do it again?

Hells yeah!

Thanks to all the awesome peeps who made our time amazing!

A massive big thank you to those involved in making the SLF happen, Simon and Andrea in particular. But also all the other volunteers, exhibitors and crew we met.

The SLF crew was so supportive, helpful and encouraging. Thanks so much for having us as part of your team!

To the punters who came up and chatted – thanks, for your energy, stories and time – it was truly a blessing to meet you all, spend some quality time to connect and hear what you have been up to.

And a big salute to City of Melbourne for putting on such an important event. It was great to see the community coming together to discuss such critical issues that affect us all.

Melbourne … you Rock!

09/02/201812/02/2018

Bio Bike: Your Future Thanks You!

This post shows how we constructed the Bio Bike frame into our second performance model, Your Future Thanks You.

See the last couple of posts for first Bio Bike Model: The Eco T(h)anks.

This is the model we will be using for this weekend’s Sustainable Living Festival. I can’t wait!

Click here to get the Festival Highlights Program.

Here’s the listing for our performance from the Festival Program.

Sweet!!!

I am super happy we were forward-thinking enough to make the Bio Bike frame modular. And now that we have two different tops that we can interchange, it makes the Bio Bike frame so much more versatile.

Currently, we have two tops we can use for two different performances.

The Eco T(h)anks and the Eco Protection Corps
Your Future Thanks You

So, it has been all action stations to get the Bio Bike frame that we previously constructed as the based for the Eco T(h)anks into the Your Future Thanks You.

Construction started, of course, with our Bio Bike base…

Claire had done an amazing job bending the PVC piping to shape the pod shell.

We wanted the pod to look a little comical and dinky.

We both agreed that we didn’t want a fully polished piece, we liked the home-made-any-one-can-do-this feel. We also didn’t want to over-engineer, complicate or over-decorate the pod. The whole point was that it was grassroots and fun.

We also wanted people to be able to see that it was clearly made out of recycled materials and that it wasn’t ‘perfect’ – and didn’t need to be to be super fun!

Claire had a previous artwork that we refashioned to be the back of the pod. The green section gave it a bit of colour and we decided to let it flop at the front because we liked the odd and unruly look of it – made you think that there is no way this thing could fly – which was perfect!

The pod shell was constructed out of recycled PET bottles attached together. I then lay it over the pod and zip tied it to the pod frame, while Claire was working on the wings.

Then, Hey Presto! The wings were ready.

Now, all we have to do is attach the propellers and put it on the bike!

I’ll be riding this Bio Bike from Footscray into Federation Square – just as I did for our 2014 SLF roving performance, Leki & the Ova.

I LOVE doing this!

It is a great way for the bike structure to settle in, I get to see if there are any last minute adjustments needed, and it is great to go whizzing by the poor unsuspecting public and see their faces! Honk! Honk!

It makes me super happy to ride our art bikes to the festival site. It gets me in the happy, bikes-are-awesome mood and this awesomeness is carried over into when the performance starts as I am already primed for fun!

Unleash the beast!

Here is the final Bio Bike…

Here’s our listing on the event program below!

See you all there!

05/02/201810/02/2018

Constructing the Eco T(h)anks

I’ve been working on the Bio Bike Project for the last couple of weeks. The Eco T(h)anks is the first of two models that will share a similar frame, but have a different (modular) top that is interchangeable depending on the event. The second variation is Your Future Thanks You, which has a UFO-style top (see next post). Given the sustainable focus of the upcoming SLF, where this project will perform, it looks increasing like we will use the Your Future Thanks You model for this weekend. However, the Eco T(h)anks was the first to be constructed as a prototype. So this post outlines the frame and how the top section of the Eco T(h)anks was made. Enjoy! NG.

See our Instagram for more Eco T(h)anks construction stage photos.

Constructing the Eco T(h)anks

The previous post explained the conceptual background and aims of this Bio Bike model, the next step was to turn these plans into reality.

Stage 1 was undertaken in Coolie’s fabrications workshop in northern NSW (Cheers Coolie!) and subsequent stages completed in my backyard in Brisvegas (Brisbane). Claire did a great job of spray painting, attaching the turret and decorating the outside.

There is still a bit more to do to complete this piece. It is great to have all the main hard work out of the way and get a better sense of what the final structure could looks and feel like. And now, only the fun bits are left to do!

Here’s how it came together…

Stage 1: The Frame

The first stage was to use a general purpose bike to get a sense of dimensions and scale. Then we cut a pattern for the side panels out of 5mm white corflute. This was double layered in alternating directions and the central seam was designed to interlock on the inside to help with rigidity.

Two sizes of recycled PVC piping we cut to make the square frame. This frame is what the side panels will had from.

My main concern here was to make the sides easy to flatpack down (for transport in a bike bag) and easy to assemble.

Of course weight, balance and manoeuvrability were key issues.

I didn’t want to the structure to be over-engineered or overly complicated to make. I had limited time, money and access the to workshop – so this meant being productive and innovative to get an outcome with the resources at hand.

As well as fashioning four custom-made hangers to attach and support the side panels, zip ties and gaffer tape were the order of the day to attach the base to the bike.

It was important to intermittently take the bike for a test run to be sure that it was still functional as a bicycle as well as relatively easy to use re: turning, overall weight, balance, getting on and off, safety, bump in/out transportability, and the like.

The last task was to make the turret and the barrel.

The front piece of the turret needed to be made of a stronger metal/resin material so that it could hold the weight of the barrel.

The barrel was carefully measured so that it did not go out too far (for safety and weight reasons), but far enough so the effect ‘barrel’ was achieved

The next challenge was how to attach this to the handle bars.

Stage 2: Eco T(h)ank base structure

Then it was time to head back home to Brisvegas for assemblage.

First step was to reconstitute the frame and the get the front of the turret on the handlebars – this took a little ingenuity. Claire ended up using a wire frame (used in fridges for wine bottles) and attached that to the back so there were points to lash zip ties to the bike – it worked a treat!

Then it was time to use 2mm black corflute to wrap around the side panels to simulate tracks (this effect will be developed further at a later stage) and to enclose the front and back of bike, whilst being mindful of how we get on and off the bike.

A few well placed large cogs of bike cassettes were screwed on meant overlay points were more rigid, helped with stabilising the structure and added a strong recycled aesthetic – which I thought worked really well.

And the final basic structure is complete!!!

The wheels turn freely and I can ride the bike unhindered.

The structure is light and versatile enough to be transferred to any kind of bike frame.

It still needs some decorations and external work done, but I’m very happy with the base structure!

Overall it took 3 days to make.

Thanks so much to Coolie, TK and Claire for their direct input, time, ideas and labour!

I really enjoyed doing this project as I got to use materials and tools that I have not used before. This was one of the main reasons for undertaking their project – to develop my technical skills and be a little bolder in what I envision and can produce – and I am delighted with the result!

The next post will show how we modified this base with a different (modular) top to make the Bio Bike Model 2: Your Future Thanks You.

See our Instagram for more Eco T(h)anks construction stage photos.

28/01/201807/02/2018

Sustainable Living Festival – Bio Bike ACCEPTED

Image: SLF 2018

Hey, bike nuts! Welcome back!

The last week has been super crazy getting ready, because…

A while back, my regular creative collaborator and friend Claire Tracey and I put together a roving performance idea and application for the upcoming 2018 Sustainable and Living Festival (SLF)- and we got the news it was successful!

Sustainable Living Festival – Bio Bike ACCEPTED

The Festival’s Program Coordinator Big Weekend emailed:

Thank you for your Festival application. We are pleased to inform you that your event application has been accepted! The team at the Sustainable Living Festival are delighted to have your event as part of our program.

Woohoo!!

So, we are heading to Melbourne to perform the Bio Bike at the 2018 SLF!

Previous SLF adventures – Leki & the Ova

The phenomenal Claire Tracey and I have previously collaborated for the 2014 SLF, where we created the roving performance/art bike Leki & the Ova.

This project used Leki as the basis for a pedal-powered no-money/barter/trade/swap, mobile op shop. It was sooooo much fun!

Leki and the Ova will be very familiar to regular BCC readers, given it is immortalised as the central feature image for the Bicycles Create Change homepage.

We roved the Festival and went out twice a day. We had a brilliant time and were a roaring success – the punters loved being part of it … and so did we!

It was a wicked project to make and present – and Claire and I knew we worked well together and have since joined forces on a number of ventures.

So we threw our hat into the ring for this year with our concept of the Bio Bike … and hey presto! We’re in!

So, no time to waste – we have to get organised!

But first a bit of background.

What is the SLF Big Weekend?

In it’s own words, the Festival’s signature Big Weekend event will be staged between the 9th and 11th of February. Held in the cultural hub of Federation Square and Birrarung Marr, the Festival’s Big Weekend showcases the main attractions of the Festival’s calendar.

Featuring interactive workshops, talks, technology demonstrations, art, film and live performance pieces (of which our roving Bio Bike performance will feature! NG).

One of the main attractions of the Big Weekend is the Exhibitors Market featuring over 100 exhibitors, including vendors showcasing the very best of organic food, beer and wine. Ethically-sourced clothing, sustainable building designs and gardening options will also be on show.

Treadlie and Green Magazine will be back to host the always popular Treadlie Bike Hub, with bikes, accessories and even a test track to help you make the switch from horsepower to human-power.

Click here for a sneak peek at the SLF guide highlights.

Our Bio Bike Project Aim and Overview

As an arts collective, we aim to educate, encourage and empower participants to seriously think about their ability to affect positive environmental change.

Our event is focused on raising awareness about the necessity of transitioning to a ‘below zero emissions’ society and examines creative solutions to creating this widespread societal change as soon as possible.

The Bio Bikes roving performance uses positive reinforcement and humour to create public awareness about climate change and encourages viewers to participate in the performance by interacting with the sculptural bikes when they are stationary.

Next steps…

So, it has been action stations to get the foundations organised and prepped for the Bio Bike. We already have a clear conceptual plan of what we want the performance to entail, but it is the props and bike itself that requires time, skills, materials and construction. With the Festival fast approaching, the making of the Bio Bike is a top priority.

So, I’ve been away for the last 5 days visiting a dear long-time friend, called Coolie, in northern NSW. (No internet there, hence the delay in uploading this post- sorry!). Coolie’s technical expertise, insight and fabrication workshop was invaluable in constructing a Bio Bike prototype which will be a major part of our roving performance.

The next couple of posts will be tracking our project development as we refine and work on the Bio Bike, props, costumes and production.

Stay tuned to see how it unfolds – and if you are in Melbourne, we’ll be seeing you at the Sustainable Living Festival in a couple of weeks!

Image: SLF 2018